Speed Controller 3098693 Generator Spare Parts Governor Automatic Control

GOVERNOR 3098693

Governor is an automatic adjustment device that automatically increases or decreases the fuel supply of the fuel injection pump according to changes in the diesel engine load, so that the diesel engine can run at a stable speed.
Speed regulators have been widely used in industrial DC motor speed regulation, industrial conveyor belt speed regulation, lighting adjustment, computer power supply cooling, DC fans, etc.

Categories: CUMMIN Replacement, Speed controller

Description

Description

Warranty:	1 Year
Weight:	0.9kg
Generator Type:	Diesel Generator
Model NO. :	3098693
Trademark:	New
Specification:	14125cm
Origin:	China
Production Capacity:	100000 Piece/ Year
Usage:	Common Units
Installation Method:	Portable
Transport Package:	Carton
HS Code:	9032899090

Product Description

3098693 Engine Governor Engine Speed Control Unit

Description:

Governor Speed Controller 3098693 For use with generator sets over 500KW is rugged enough to be placed in a control cabinet or mounted on the engine with other dedicated control equipment. If water, mist or condensate may come in contact with the controller, it should be properly installed. This will allow fluid to drain from the speed control unit.

Technical Data:

3098693
RPM Stability	<±0.25%
Speed Range	1KHz ~ 6.5KHz
Thermal Stability	Max ±0.7%
IDLE Regulation	260 ±20Hz
DROOP Regulation	Minimum 15Hz ±6Hz/ 1 Amp
DROOP Regulation	Maximum: 400Hz ±75Hz/ 1 Amp
External Speed Regulation	±200Hz (with 1 KΩ connected)
AUX Input Sensitivity	148Hz / 1V., ±10Hz
Impedance	1MΩ
Working Temp Range	-40 ~ 85 °C
Working Humidity Range	Maximum 95%
Stocking Temp	-55 ~ 92 °C
Shocking	20-100HZ 500mm/Sec.
Voltage	12 or 24V
Grounding Pole	Negative pole
Power Supply	40mA
Actuator Continuous Current	Minimum 1A, Maximum 4.5A
Signal	2 ~ 120V RMS