Datakom Original Dkg307 Mpu Controller for Diesel Generator
controller DKG307
- The generator controller is a sensor and actuator used in the automatic control system. It is used to control the starting, stopping, important parameter measurement, fault alarm, or shutdown protection of the generator. The use of intelligent control systems will greatly improve the efficiency of diesel power generation. The operation of the unit ensures the stable operation of the diesel generator set, saves manpower and material resources, and improves work efficiency.
Categories: Controller, DKG Series
Description
Warranty: | 1 Year |
Weight: | 1kg |
Generator Type: | Diesel Generator |
Model NO. : | DKG307 |
Trademark: | New |
Specification: | 15*10*20cm |
Origin: | China |
Production Capacity: | 100000 Piece/ Year |
Usage: | Common Units |
Installation Method: | Portable |
Transport Package: | Carton |
HS Code: | 8537109090 |
Packaging & Delivery
Package Size
20.00cm * 20.00cm * 20.00cm
Package Gross Weight
0.800kg
Lead Time
5 days (1 – 5 Pieces)
7 days (6 – 10 Pieces)
To be negotiated ( > 10 Pieces)
7 days (6 – 10 Pieces)
To be negotiated ( > 10 Pieces)
Product Description
DKG-307 AUTOMATIC MAINS FAILURE UNIT
Product Introduction
The DKG-307 is a comprehensive AMF unit for single genset standby or dual genset mutual standby operations. The unit is available with MPU or CANBUS versions. The CANBUS version connects to ECU controlled electronic engines providing engine control, protection and instrumentation without extra senders.
The unit is able to initiate modem calls and send SMS messages in fault conditions through external modems.
Alternator voltage: 0 to 300 V-AC (Ph-N) |
Alternator frequency: 0-100 Hz. |
Mains voltage: 0 to 300 V-AC (Ph-N) |
Mains frequency: 0-100 Hz. |
DC Supply Range: 9.0 to 33.0 V-DC |
Cranking dropouts: survives 0 V for 100ms. |
Typical Standby Current: 100 mA-DC |
Maximum Operating Current: 250 mA-DC (Relay outputs open) |
Generator/Mains Contactor Relay Outputs: 16 A / 250V |
DC Outputs: 10A @ 28V |
Charge excitation: min 2 Watts |
Magnetic pickup input:: 0.5 – 30 V-AC. |
Magnetic pickup frequency: 10 KHz max. |
Current inputs: from CTs, …/5A. Max load 0.7VA per phase |
Analog input range: 0-5000 ohms. |
Serial port: RS-232, 9600 bauds, no parity, 1 bit stop |
Operating temp.: -40°C (-40°F) to 70°C (158°F). |
Storage temp.: -55°C (-67°F) to 80°C (176°F). |
Maximum humidity: 95% non-condensing. |
Dimensions: 172x 134 x 46 mm (WxHxD) |
Panel Cut-out Dimensions: 151×111 mm minimum. |
Weight: 340 g (approx.) |
Case Material: High Temperature ABS/PC (UL94-V0) |
IP Protection: IP65 from front panel, IP30 from the rear |
Installation: Flat surface mounting on a Type 1 Enclosure. Rear retaining plastic brackets. |
We manufacture many brands Controller, including DeepSea,ComAp,Smartgen,Kutai, etc.
Related products
-
Hgm6110 Smartgen Genset Generator Controller Hgm6110can
Read more -
Dkg105 Generator Engine Controller Auto Start Stop Diesel Engine Controller for Diesel Gasoline Engine Generator
Read more -
Mebay DC30d Newly Porduced Engine Controller for Diesel Generator Remote Control Panel
Read more -
Dse6120mkiii Original Deep Sea Amf Auto Stop Generator Controller Panel
Read more